Folding picnic table – A table-size picnic is difficult to transport. A lightweight folding picnic table is a great solution if you like picnicking in different areas. The construction of a small 3 feet by 4 feet table is an easy task, accomplished with a few tools, wood and hardware.
Ideas make a folding picnic table; Trim the 4 – foot square sheet of plywood up to 3 feet by 4 feet off the table. Cut two pieces of 3 feet 6 inches 2-for-4. He put the floor and aligns them so that are feet apart and parallel. Center the surface of the table on them to the sides of 4 feet are parallel to the 4s Nails through the top along each 4 2-portion side. Cut two pieces of 4 inches long 2-by-4. Turn the top of the table a nail and a piece of 4-inch screen TV on top of a piece of 3 feet 6 inches at one end so that it lines up. Nail the second piece 4 inches long on top of the other 3-foot 6-inch piece at the opposite end.
Make a folding picnic table, Cut two 3 – foot and two pieces of 2 feet 9 inches 2-for-4 for the legs. Stand a lead of 3 feet at the end of each 3-foot 6-inch piece of the small piece of 4 inches. Attach a hinge in the inner corner of each leg with screws that fold into 4-inch pieces. Stand lead to 2 feet 9 inches on each piece of 4 inches and attach a hinge on the inside of each leg and 4 – inch piece. They fold in the legs after 3 feet bend. Sand the rough edges of the table completed. Brush wood stain or paint on all surfaces and let dry.